TRX500CE

For Information call 1-941-722-1174

 

Specifications

Injection Unit

ITEM

 UNITS TRX500  SPECS
Screw Diameter mm/in 75/2.95 80/3.15 85/3.34
Screw  Ratio L/D 23.5 22 20.7
Shot Size cm3 1767 2010 2269
Injection Weight gm/oz 1608/56.7 1830/64.5 2065/72.8
Injection Rate g/s 401 456 515
Plasticizing Capacity g/s 49 55 69
Injection Pressure Mpa 187 164 145
Screw Speed Rpm 0-170

Clamp Unit

 Clamp Force Kn/Ton 5000/551
Toggle Stroke mm/in 770/30.3
Tie Bar Spacing mm/in 800X800 / 31.5X31.5
Max Mold Height mm/in 800/31.5
Min Mold Height mm/in 250/9.84
Ejector Stroke mm/in 230/9.05
Ejection Ports # 17

Misc. Specs

 Pump Pressure Mpa 16
Pump Motor KW/HP 45/60.3
Heater KW 30
Hopper Capacity Kg/Lb 100/220
Oil Tank L/Gal 900/237
Machine Dimensions M/In 8.3X2.2X2.7 / 326.7X86.6X106.3
Machine Weight mT/Ton 20/22
NOTE: SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
            WE ARE NOT RESPONSIBLE FOR MISTYPED OR INACCURATE INFORMATION.