TRX400CE

For Information call 1-941-722-1174

Specifications

Injection Unit

ITEM

 UNITS TRX400CE  SPECS
Screw Diameter mm/in 70/2.75 75/2.95 80/3.15
Screw  Ratio L/D 21.4 20 18.8
Shot Size cm3 1347 1546 1759
Injection Weight gm/oz 1226/43.2 1407/49.6 1601/53.2
Injection Rate g/s 352 404 460
Plasticizing Capacity g/s 45 49 55
Injection Pressure Mpa 174 152 134
Screw Speed Rpm 0-180

Clamp Unit

 Clamp Force Kn/Ton 4000/440
Toggle Stroke mm/in 690/27.16
Tie Bar Spacing mm/in 720X720 / 28.34X28.34
Max Mold Height mm/in 730/28.74
Min Mold Height mm/in 220/8.66
Ejector Stroke mm/in 170/6.69
Ejection Ports # 13

Misc. Specs

 Pump Pressure Mpa 16
Pump Motor KW/HP 37/49.6
Heater KW 21
Hopper Capacity Kg/Lb 100/220
Oil Tank L/Gal 720/190
Machine Dimensions M/In 7.6X2.0X2.6 / 299.2X78.7X102.3
Machine Weight mT/Ton 15/16.5
NOTE: SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
            WE ARE NOT RESPONSIBLE FOR MISTYPED OR INACCURATE INFORMATION.