TRX230CE

For Information call 1-941-722-1174


Specifications

Injection Unit

ITEM

 UNITS TRX230CE  SPECS
Screw Diameter mm/in 50/1.96 55/2.16 60/2.36
Screw  Ratio L/D 22 20 18.3
Shot Size cm3 477 577 687
Injection Weight gm/oz 434/15.3 525/18.5 625/22
Injection Rate g/s 132 160 191
Plasticizing Capacity g/s 23.8 28.8 24.3
Injection Pressure Mpa 215 178 150
Screw Speed Rpm 0-165

Clamp Unit

 Clamp Force Kn/Ton 2300/253
Toggle Stroke mm/in 480/18.89
Tie Bar Spacing mm/in 535X535 / 21.06X21.06
Max Mold Height mm/in 550/21.65
Min Mold Height mm/in 200/7.87
Ejector Stroke mm/in 125/4.92
Ejection Ports # 5

Misc. Specs

 Pump Pressure Mpa 16
Pump Motor KW/HP 22/29.5
Heater KW 16
Hopper Capacity Kg/Lb 50/110
Oil Tank L/Gal 400/105
Machine Dimensions M/In 6X1.6X2.3 / 236.2X63X90.5
Machine Weight mT/Ton 8/8.8
NOTE: SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
            WE ARE NOT RESPONSIBLE FOR MISTYPED OR INACCURATE INFORMATION.